Monthly Archives: October 2021

PUDUO Resin Beginners Kit

All in one Beginners Kit

Have you been wanting to try using Epoxy Resin, but didn’t know where to begin? Puduo Resin has just the kit for you! 

 This kit comes with everything you need to create your first piece of resin art! In this article I will take you step by step though your first journey into using Puduo Epoxy Resin!

PUDUO Resin Beginners Kit

As a crafting enthusiast, I understand the hesitation about jumping into a new media. Do you have a good product. Will it be as easy as you see on social media? Do you have the proper tools? Do you have everything you need? Don’t worry! The PUDUO Resin Kit Beginner contains everything you need, and in this article I will guide you through the whole process.

PUDUO RESIN is one of the most popular brands of epoxy resin on the market. Its ease of use has propelled it to the top of the list on Amazon. It has a very low odor, virtually no bubbles, no VOC’s, and cures quickly so you get to see your creations soon after you pour. You can typically demold your custom work within 10 hours!

PUDUO Resin Beginners Kit can be purchased on Amazon. You will find links to the kit and some other helpful tools below.

Materials Needed

  1. PUDUO Resin beginners kit – 10% off coupon code: PUDUOALLIN 
  2. Silicone mat, plastic mat, foam board, or anything that will protect your work surface.
  3. Gloves – Always use gloves when working with resin! Comes in small, medium, and large.
  4. Rubbing alcohol – Use rubbing alcohol for easy clean-up of your surface and tools.
  5. Graduated cups – Extra cups are really handy to have when working with resin. 
  6. Paper towels – Use paper towels with alcohol on them to clean up spills and tools.

Directions for use

  1. Put on a pair of gloves.
  2. Protect your work surface with your choice of products listed above.
  3. Place your mold on your protected work surface.
  4. Open part A and part B bottles of PUDUO resin. Each bottle has a seal on the top. You can use a stir stick, or your finger to break the seal.
  5. Pour equal amounts of part A and part B into a graduated cup. Example: If you use 30 ml of part A, use 30 ml of part B.
  6. Mix thoroughly ensuring that you get the sides and bottom of the cup. The mixing process typically takes approximately 3 minutes. You will know it is mixed when it turns perfectly clear.
  7. Once your product is mixed, pour it into a separate cup. Get as much of the product out as you can, scraping the sides and bottom.
  8. Mix again for approximately 30 seconds. This step will make sure your product is fully mixed. 
  9. Separate the mixture into cups for pigments. If you are using 3 different colors, use 3 separate cups. 
  10. Add pigment to your cups. Use pigments sparingly as too much pigment can cause flexible or bendy resin pieces. A good rule of thumb is no more than 6% pigment. Start with a teaspoon, then mix. If you need some more, add accordingly to get your desired result.
  11. Mix pigments into your resin product. Stir until all is incorporated into your resin.
  12. For best results, let the product sit for about 10 minutes to allow the reaction to begin. This will cause the product to heat up and will release any bubbles that were introduced during the mixing process.
  13. Slowly fill your mold to the top. Try not to overfill. If you do overfill, you can use a plastic pipette to remove some of the product.
  14. Cover with a cardboard box or anything that will protect your item while it cures from dust or anything else in the air.
  15. Wait approximately 10 hours before demolding your item. 
  16. Once cured, remove your creation from the mold.
  17. Use the included drill, a Dremel, or electric drill to drill small holes for the eye screws. Be sure to use a size just a little smaller than the eye screw.
  18. Screw in your eye screws, attach a jump ring, and your choice of keyring, earring, or necklace chain to complete the project!

Mixing PUDUO RESIN Like a Pro

Mixing epoxy resin for the first time can be intimidating. Questions and doubts can often plague ones mind. What if it doesn’t work? What if I mix it wrong? That’s where the US Support Team comes in! We’re always here to help you get through these questions and guide you on your resin journey!

PUDUO RESIN is one of the most popular brands of epoxy resin on the market. This is due to how easy it is to use. As a beginner, I had issues with some of the other brands I had tried. I had issues with bubbles, and some did not cure. PUDUO RESIN hooked me the first time I used it. It worked right the first time. That meant the world to me. I have been using this product for the past 3 years. I will now share my pro tips for getting perfect results!

PUDUO RESIN can be purchased from the manufacturer on Amazon, or from the US team on this website. You will find links to both below.


I recommend certain tools which I have found to be helpful in using PUDUO Resin. I will list them in this article. These are not required. They are just recommendations. 

  1. Gloves – Gloves are recommended for all resin work. Nitrile gloves work great and won’t affect people with latex allergies.
  2. Graduated cups – We use 8 Oz cups so that we have the freedom to mix larger batches. Whatever cup you use, we recommend it have a flat bottom with no lips to ensure thorough mixing.
  3. Silicone or plastic stir sticks – We do not recommend wooden sticks because wood is porous and can easily introduce bubbles into the product.
  4. Heat gun/torch – Do not use a flame unless you are really familiar with the technique as you can burn your product or fuse it to the mold. Instead, use a spray bottle with rubbing alcohol.


Once you have your tools, you will need to select your silicone mold. Amazon has many to choose from. You can find some search results here.

How to use PUDUO RESIN:

1. Protect your work surface. You can do this with plastic, silicone sheets, parchment, or anything else that will prevent your work surface from getting damaged. Ensure it is level.

2. Wear gloves. Gloves protect your hands from contact. Change gloves whenever they get dirty. 

3. Pour equal parts of part A and part B into the cup. Stir carefully and slowly for approximately 3 minutes. You will see the two parts mixing as you stir. Your final product should be clear without any “strings” of unmixed product. Once mixed, pour into another cup and mix again for about 30 seconds. This will ensure a proper mix. If you are adding pigments, powders, pastes or anything else to your mix, do it now.

4. Let sit for about 10 minutes. This will allow the product to activate and release any bubbles you may have introduced into the mixture.

5. Place your mold on your protected, level surface. Slowly pour your mixed resin into the mold. Fill close to the top without overfilling.

6. Cover your project. You can use a plastic container, box, or anything else that will prevent your project from getting dust, animal hair, or any other debris.

7. Wait at least 10 hours. After this time, you can carefully remove your project from the mold. It may still be flexible. That’s normal. Set it on a level surface to continue curing. You can expect full cure in about 24 hours.

We have some Facebook Live videos that can give you so visual support of the steps required to mix like a pro. They can be found at https://www.facebook.com/puduoresin/live_videos

If you have any questions or need any help, please reach out to our support team.