Puduo Anti-Yellowing Formula Has Arrived!

3X Anti-Yellowing Puduo Epoxy Resin

Puduo Anti-Yellowing Epoxy Resin is a new product on the market that has been gaining popularity among DIY enthusiasts. It is a two-component epoxy resin that comes in a 1:1 ratio and can be mixed easily. The UV resistance of this epoxy resin makes it perfect for outdoor projects. Puduo Epoxy Resin is known for its easy to use formula, casting, and crafting properties. When mixed together, the two components form a clear liquid which can be used with silicone molds, live edge river tables, suncatchers, jewelry, home décor, and much more.

To mix Puduo Anti-Yellowing Epoxy Resin you will need:

Puduo Anti-Yellowing Part A – This is the Resin

Puduo Anti-Yellowing Part B – This is the hardener

Gloves – Your choice of material, just protect your hands.

Mixing Sticks (Included) – Take care of these silicone sticks by wiping them with a paper towel when done.

Mixing Cups (Included) – The included cups measure 100 ML max. For larger cups, please click here

Pigments (optional) – Choice of pigments can include: Glow in the dark, resin tint, resin dye, resin paste, glitter, or any other item you want to use that is completely dry. Water/moisture is not recommended and can ruin your project

Silicone Mold (Optional) – For more molds, please click here

Mixing Puduo Resin Like A Pro:

1) Measure the amounts equally using a 1:1 ratio. For example 40 ml of part a to 40 ml of part b. Note: I do not recommend trying to mix smaller than 80 ml total. This is because it makes it too easy to get the measurements just a little bit off.

2) Mix thoroughly. This does not mean to only mix for 3 minutes and call it good. This means to mix the product until it is perfectly clear. Make sure that you get the sides on the bottom of the cup really well.

3) Pour your mixture into another cup. Get as much of the product out of the cup as you can. Then mix the new mixture again. Mix it for approximately a minute.

4) Split the mixture into as many cups as you have pigments. For instance, if you are only using red, black, and clear, split it into three cups. Mix the pigments in well. Then let the product set for approximately 15 minutes to release all of the bubbles and begin its exothermic reaction.

*The mixing instructions are the same for all Puduo Epoxy products.

Watch @GlowArtAz Test This Product:

I created suncatchers using this new formula and I will be hanging them in our shop. We live in Arizona, so the sun here will definitely be a great test! We will do an update video in 30 days.